Loading ...
Loading ...
Loading ...
Care and Cleaning
Dishwasher
Filters
17
Cleaning the Filters
Inspect and clean the filters periodically. This
should be done every month. If there is a
decrease in wash performance or dishes feel
gritty, this is also an indication the filters need
to be cleaned.
To clean the filters, remove the bottom rack.
Lift out the main filter and cup assembly. Lift
out the fine filter.
Rinse the main filter, fine filter and cup with
warm soapy water. Scouring pads or brushes
can scratch the filter surface but a soft brush
or sponge may be needed to remove stubborn
soils or calcium deposits caused by hard
water.
Once cleaned replace the fine filter followed by
the cup and main filter assembly. Be sure to
press them in place as improper replacement
of the filter may reduce the performance level
of the appliance.
Cleaning the Spray Arms
Because hard water chemicals will clog the
spray arm jets and bearings, it is necessary to
clean the spray arms regularly. To remove the
spray arm, twist the retaining nut 90 degrees
and pull the spray arm off the shaft.
Wash the arms in soapy, warm water and use
a soft brush to clean the jets. Replace them
after rinsing thoroughly.
Main filter
Cup
Fine
filter
Retaining
nut
Washer
Retaining nut
Upper rack
Spray
Arms
Loading ...
Loading ...
Loading ...