Loading ...
Loading ...
Loading ...
Dishwasher
Control Panel
11
DELAY
HOURS
SELECTION
This option allows you to delay the start of a wash cycle for up to 24
hours.
With the door open and a cycle selected, press the DELAY HOURS button
to choose the number of hours you want to delay the wash cycle. The
hours will show in the display window.
NOTE: To cancel the DELAY HOURS option before the start of the cycle,
repeatedly press the DELAY HOURS button until the display reads “00.”.
STARTING
A CYCLE
START/RESET Press the START/RESET button and close the door within 4 seconds to
start the cycle or begin the DELAY HOURS start countdown. The START/
RESET LED will light. The wash cycle will begin after 10 seconds and then
pump out for 60 seconds prior to filling the dishwasher with water.
To activate the display, press any button with the door open.
Interrupt
or Pause
To interrupt or pause a dish cycle, slowly open the door. Opening the door
will cause the wash cycle to pause. The dishwasher will beep every minute
to remind you to close the door. To restart or resume the cycle, press
START/RESET, and close the door within 4 seconds. If the door is not
closed within 4 seconds, the START/RESET LED will start blinking and
the dishwasher will beep once every minute to signal that the cycle did not
restart. If the the START/RESET LED is blinking, the dishwasher is waiting
for input.
Cancel To cancel a wash cycle, press and hold the START/RESET button for 3
seconds with the door open, and then close the door. This dishwasher will
drain and the wash cycle lights will turn off.
STATUS
INDICATORS
CLEAN The green light will display and a beep will sound to alert you that the
wash cycle is complete. If the door is NOT opened, the beep will sound
four times.
LOW RINSE
AID
Displayed when rinse agent is low or empty. See Dispensers section.
DISPLAY
Time
Remaining
During operation, the display shows the total number of minutes remaining
in the cycle (up to 99 minutes). For cycle times above 99 minutes the
display will read “99”. During a delay start, the display will show hours of
time remaining until the cycle starts.
5
6
7
8
Loading ...
Loading ...
Loading ...