Loading ...
Loading ...
Loading ...
11
EN
English
5 Cleaning your
humidifier
Note
• Always unplug the humidier from the
electrical outlet before you clean it.
• When pouring water into or out of the
reservoir, make sure to pour water at the
opposite side of the drain hole and air
inlets.
• Never use abrasive or aggressive
cleaning agents such as alcohol to clean
any part of the humidier.
• It is normal to have dust inside upper
unit of the appliance after using it for a
while. User cannot clean it by himself.
Please contact local service center for
support.
Daily cleaning
1 Switch o the humidier and unplug
from the electrical outlet.
2 Empty reservoir.
3 Rinse reservoir, wipe clean and dry
with a clean cloth or paper towel.
4 Rell reservoir to ll mark with cool,
clean tap water. Do not overll.
5 If necessary, lower humidity control
settings or turn o humidier if
moisture forms on walls or windows.
Weekly cleaning
1 Clean the inside and outside of the
humidier once a week by following
the Removing scale and Disinfecting
the reservoir instructions.
2 Clean the lter every week to keep
it hygienic.
Removing scale
1 Switch o the humidier and unplug
from the electrical outlet.
2 Remove the upper unit by holding it
at both sides (g. c).
3 Remove lter and lter support from
the reservoir (g. o).
4 Empty reservoir.
5 Fill reservoir with 8oz./236.5ml
undiluted white vinegar. Let solution
sit in reservoir for 20 minutes
(g. p).
6 Clean all interior surfaces with
a soft brush. Dampen soft cloth
with undiluted white vinegar and
wipe out reservoir to remove scale
(g. q).
7 Rinse thoroughly with clean, warm
water to remove scale and cleaning
solution before disinfecting the
reservoir (g. r).
Disinfecting the reservoir
1 Follow the instructions for removing
scale.
2 Place reservoir in a sink. Fill reservoir
with a solution of 1 tsp/5g chlorine
bleach in 1 gal/3.78liters water. Let
solution stay 20 minutes, swishing
every few minutes. Wet all surfaces
(g. s).
3 Empty reservoir and rinse with water
until bleach smell is gone (g. t).
4 Dry the inside and outside of the
reservoir with a soft, clean cloth or
paper towel (g. u).
5 Put the lter and lter support back
into the reservoir (g. f).
6 Place the upper unit back onto the
reservoir (g. h).
Loading ...
Loading ...
Loading ...