Loading ...
Loading ...
Loading ...
42
MAINTENANCE
Oven Light Bulb Replacement
Only use a 25 watt halogen G9 light bulb. Regular light bulbs cannot tolerate oven
temperatures.
To replace your oven light bulb:
1. Make sure appliance and lights are cool, and power has been turned off before replacing light
bulb.
2. Remove glass cover, pull out blub out, push new bulb in, replace and press glass cover back
in place
o Hold replacement light bulb with a dry cloth, do not let hands make contact with light
bulb. Oils from skin can shorten replacement light bulb life. If you do touch bulb,
clean with rubbing alcohol before use.
Oven Doors
The oven door hinges may require lubrication periodically to work smoothly. Whether this is necessary, or
how frequently, depends on how and how often the oven is used.
Open the oven door fully and apply a small amount of lubricant such as food-grade light oil or grease
to the ball visible in the hinge slot on your door.
Do NOT use sprays like WD-40 or CRC that may get onto the oven door surface. We
recommend a food-grade light oil or grease. Avoid using cooking oil or mineral oil.
ELECTRICAL REQUIREMENTS
The Electrical Appliance Rating:
240V/ 60 hertz, 24 amp, recommended 30 Amp circuit for single oven, 50 Amp circuit for stacked ovens
Effective January 1, 1996 the National Electrical Code requires that new, but not existing construction
utilize a four-conductor connection to an electric oven. For existing construction you must use a three-
wire, single phase A.C. electrical system. If you connect to aluminum wiring, properly installed
connectors approved for use with aluminum wiring must be used.
Oven will function properly on 208V power. Preheat will be slightly extended, but once preheat is
complete no other performance will be impacted.
ATTENTION
ATTENTION
ATTENTION
Loading ...
Loading ...
Loading ...