Loading ...
Loading ...
Loading ...
HITCH REMOVAL/INSTALLATION
1. To remove the hitch, remove the cotter pin and hitch pin. Remove the hitch,
then reinstall the hitch pin and secure the cotter pin.
2. To install the hitch, remove the cotter pin from the hitch pin and remove the
hitch pin.
3. Install the hitch to the receiver.
4. Reinstall the hitch pin (from the left side of the hitch) through the bore of
both the receiver and the hitch.
5. Reinstall the cotter pin. Make sure the hitch assembly is secure at that the
cotter pin is properly engaged over the hitch pin.
Hitch and Cotter Pin
Step 4 Step 5
7-WAY TRAILER CONNECTOR
The 7-way trailer connector installed
on your vehicle meets the
requirements of European standard
ISO 1724.
This connector uses all 7 pins on
newer model trailers. An older model
trailer may not be compatible with this
connector.
Improper electrical wiring changes can
result in damage to both vehicle and
trailer components. When in doubt
about your trailer connection, please
contact a qualified towbar specialist for
assistance.
46
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...