Loading ...
Loading ...
Loading ...
OIL AND FILTER CHANGE
See the table on page 109 for fluid recommendations, capacities and plug
torques. Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart. Always change the oil filter whenever changing oil.
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to warm up at idle for two to three minutes.
3. Stop the engine.
4. Clean the area around the drain plug.
NOTE
SCRAMBLER:On the bottom of the vehicle, a guard plate covers the oil filter
access hole. Remove the three bolts securing the guard plate and remove the
guard plate.
5. Place a drain pan under the crankcase.
6. Remove the drain plug. Allow the oil to drain completely.
CAUTION
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
7. Install a new sealing washer on the drain plug. The sealing surfaces on drain
plug and crankcase should be clean and free of burrs, nicks or scratches.
8. Reinstall the drain plug. Torque to specification.
114
MAINTENANCE
Loading ...
Loading ...
Loading ...