Loading ...
Loading ...
Loading ...
49-7769
Installation Instructions
INSTALLATION INSTRUCTIONS
2. ATTACH CONDUIT
8VHWKHURXQGNQRFNRXWKROHDWWKHWRSRIWKHFRQWUROER[
WRLQVWDOOFRQGXLWFRPLQJIURPWKHEUDQFKFLUFXLW,QVWDOO
and clamp the conduit through the conduit clamp and
EULQJZLUHOHDGVLQWRWKHMXQFWLRQER[/HDYH´RIZLUH
free from the end of the conduit.
Conduit
Conduit
clamp
1. REMOVE CONTROL BOX
PANEL
5HPRYHWKHFRQWUROER[SDQHOE\WDNLQJRXWWKHIURQW
VFUHZVDQGWKHWRSVFUHZV
&RQWURO%R[3DQHO
ELECTRICAL CONNECTIONS
3. MAKE WIRE LEAD CONNECTIONS INSIDE THE CONTROL BOX
Pull the power disconnect located in the front of the
FKDVVLV'LVFRQQHFWWKHSRZHUFRPLQJLQWRWKHXQLW
from the main breaker panel or the closet mounted
disconnect.
NOTE:
• All electrical connections and wiring must be installed
by a qualified electrician and conform to the National
Electric Code (NEC) and all local codes which have
jurisdiction.
• All chassis must be hard wired with properly sized
breakers. Use HACR type breakers to avoid nuisance
trips.
• Unit must be properly grounded.
Conduit
0DNHDOOZLUHFRQQHFWLRQVE\XVLQJDSSURSULDWH
UL-listed electrical connectors and techniques.
%HVXUHWKDWDOOZLUHOHDGVDUHLQVLGHWKHFRQWUROER[
DQGQRWSLQFKHGEHWZHHQWKHSDQHODQGWKHXQLW7KH
JUHHQLQVXODWHGJURXQGZLUHIURPWKH=RQHOLQH0867
BE connected to the branch circuit ground wire.
5HSODFHWKHFRQWUROER[SDQHODQGVHFXUHWRWKHXQLW
by replacing the 7 screws removed earlier.
Ground
Wire
Ground
Wire
/
L2
WARNING
RISK OF ELECTRIC SHOCK
Can cause injury or death. This appliance must
be properly grounded.
Turn OFF electrical power before service or
installation.
WARNING
Electric Shock Hazard
%HIRUHVHUYLFLQJGLVFRQQHFWSRZHUWRWKH=RQHOLQHDW
WKHIXVHER[RUFLUFXLWEUHDNHUDQGSXOORXWHOHFWULFDO
disconnect on front of the chassis.
Failure to do so can result in personal injury and/or
death.
Loading ...
Loading ...
Loading ...