Loading ...
Loading ...
Loading ...
11ICE BOX MODELS
ICE BOX MODELS – WIM1000 & WIM1200
The ice box compartment is not a deep freezer and is
designed for making ice cubes. It is not recommended
for the storage of frozen food.
Ice making
To make ice cubes, fill the ice tray with water and place
it in the ice box. To remove ice cubes easily, run water on
the tray before gently twisting and inverting the tray.
De-icing
The de-icing system for the fridge compartment is
automatic in models WIM1200, and vertical fridges
WRM1400 and WRM2400. The rear inside of the fridge
is covered with frost when the compressor operates and
de-ices when it stops. When the ice melts, the water
evaporates automatically. WIM1000 achieves its cooling
from the ice box.
De-icing the ice box
The ice box compartment must always be de-iced when
the layer o frost reaches a thickness of about 4mm. This
compartment should be de-iced at least once a year
regardless of the thickness of the frost. Model WIM1000
has the added feature of a drip tray to collect the water.
When de-icing, a scraper or plastic utensil may be used.
Never use metal instruments or electrical appliances to
de-ice the ice box.
1. Switch off and disconnect the appliance.
2. Remove the plug from the drain (Model WIM1200 –
diagram below)
3. Models WIM1200, WRM1400 and WRM2400 have an
additional ‘Drain Peg’ supplied with this user manual.
Use the drain peg to ensure the drain hole is not
blocked before defrosting (see diagram below). Do
not leave the drain peg in the drain hole.
4. Place a container underneath the drain hole to
collect the water.
5. To speed up the process, you can place a bowl of hot
water inside the compartment and close the door.
6. When de-icing is complete, clean the appliance
before restoring the power.
Loading ...
Loading ...
Loading ...