Loading ...
Loading ...
Loading ...
– 25 –
To Cook Food Using
Sensor Reheat/Cook
Sensor Cook/Reheat allows you to cook foods without selecting times and power levels. The sensor detects
the heat and humidity generated by the food and cooks your food automatically.
Place food into an appropriate sized dish for the volume of food you are cooking. Cover securely with plastic
wrap or a securely ¿ tting lid (do not use any snap closing lids). Plastic dishes are not suitable as a secure
seal cannot be achieved and inaccurate cooking may result.
1
Touch Once
The menu appears in the Display Window.
2
Select desired menu
Tapping “+”/“-” or swipe the slider bar until the desired menu appears in the Display Window.
(see below chart).
Menu Recommended Weight Range
Accessory and
Recommended Container
1. Sensor Reheat 125 - 1000 g -
2. Vegetables 125 - 500 g -
3. Frozen vegetables 125 - 1000 g -
4. Rice 1 - 2.5 cups -
5. Dried pasta 125 - 500 g -
6. Fresh pasta 200 - 800 g -
7. Casserole 800 - 2000 g -
8. Steam Fish 125 - 500 g -
9. Steam Frozen Fish 250 - 550 g -
10. Jacket potato 300 - 1200 g Glass shelf in middle position
11. Frozen potato products 500 - 1000 g Glass shelf in higher position
Note:
If you are satis¿ ed with the result of the SENSOR Reheat/Cook programme, please skip to step 5.
3
Touch once
Touch the Set key to verify the selection.
4
Adjust to Taste
Preferences for degree of cooking vary for each individual. After having used auto sensor programs a
few times, you may decide you would prefer your food cooked to a different degree of cooking. By using
“+/-” the programs can be adjusted to cook food for a longer or shorter time. After selecting the sensor
program, tap “+/-’’ or swipe the slider bar before touching Start. The oven will automatically cook the
food 10% more or 10% less.
5
Touch Once
Do not stop the oven or open the door during this part of the cooking stage as inaccurate cooking may
result. After the heat humidity is detected by the SENSOR, the remaining time appears in the Display
Window and begins to count down.
NOTES:
1. If the temperature of the cavity is high, sensor cook/reheat feature can not be used. Display window will
display "HOT". Sensor Reheat/Cook feature can not be used until the "HOT" disappears.
2. When you select an automatic program symbols will appear in the display to show the cooking mode that
will be used and the accessories that are needed.
F0003BH22QP_OI.indd 25 2014/5/27 9:13:51
Loading ...
Loading ...
Loading ...