Loading ...
Loading ...
Loading ...
28
EN
Detaching the In-Door Ice Bin
1
Gently pull the handle to open the ice
compartment.
2
To remove the in-door ice bin, grip the front
handle, lift up slightly while holding both the
top and bottom parts (1), and slowly pull out
the bin as shown (2).
WARNING
• Do not touch the automatic icemaker’s
mechanical parts with your hand or a tool.
Otherwise, appliance damage or injury may
occur.
• Caution should be taken, as the automatic
icemaker operates continuously after the
freezer door is opened.
• Do not disassemble, repair or alter the
automatic icemaker. These tasks should only
be done by a service technician.
CAUTION
• The ice dispensing chute may become
blocked with frost if only crushed ice is used.
Remove the frost that accumulates by
removing the ice bin and clearing the passage
with a rubber spatula. Dispensing cubed ice
periodically can also help prevent frost
buildup.
• If discolored ice is dispensed, check the water
tank and the water supply for a possible
source. If the problem continues, contact the
LG Electronics customer information centre.
Do not use the ice or water until the problem
is corrected.
• Dispense ice into a glass before filling it with
water or other beverages. Splashing may
occur if ice is dispensed into a glass that
already contains liquid.
• Do not touch the ice outlet or the automatic
icemaker with your hand or a tool. Otherwise,
appliance damage or injury may occur.
• When refitting the ice bin, ensure that it is
placed correctly. If it is tilted or unlevel, it may
not continue to make ice due to sensor
disruption.
• Never use a glass that is exceptionally narrow
or deep. Ice may jam in the ice passage,
affecting the performance of the appliance.
• Keep the glass at a proper distance from the
ice outlet. A glass held too close to the outlet
may prevent ice from dispensing.
• Dispose of the ice inside the ice bin if you go
on vacation or if an extended power outage
occurs. Water from melting ice may drop from
the dispenser onto the floor.
• Filling the ice bin with ice cubes that were not
made by the ice maker can cause damage to
the ice bin and the dispensing auger to
malfunction.
Loading ...
Loading ...
Loading ...