Loading ...
Loading ...
Loading ...
Appliance door en
39
Removing and installing the door panels
For cleaning, you can remove the glass panels from the
appliance door.
To do this, the appliance door must be removed
beforehand (see section "Removing and fitting the
appliance door").
:Warning – Risk of injury!
The appliance must not be used again until the door
panels and appliance door have been correctly fitted.
:Warning – Risk of injury!
Components inside the appliance door may have sharp
edges. Wear protective gloves.
Removing the glass panels
Note: Lay the glass panels you have removed on a flat
surface that is soft and clean.
1. Detach the appliance door.
2. Lay the appliance door with the front side facing
down on a flat surface that is soft and clean.
3. Push on the left- and right-hand side on the outside
of the appliance door until the inner glass panel is
released on both sides (fig.
!).
4. Carefully lift the inner glass panel and remove it in
the direction of the arrow (fig. ").
5. Slide the tip of the screwdriver in between the metal
tab ‚ and the plastic underneath it (fig. #).
6. Use the tip of the screwdriver to carefully lift the
reflector ƒ until it is detached (fig. $).
7. Lift the reflector ƒ up and out (fig. %).
8. Remove the second reflector in the same way as the
first.
9. Push down on the intermediate panel around „, and
carefully lift the holder … until you are able to pull it
out (fig. &).
10. Lift the intermediate panel from below (fig. ') and
remove it in the direction of the arrow.
11. Clean the glass door panels and reflectors on both
sides with glass cleaner and a soft cloth.
:Warning
Risk of injury!
Scratched glass in the appliance door may develop
into a crack. Do not use glass scrapers, sharp or
abrasive cleaning aids or aggressive or abrasive
cleaning products.
Caution!
Make sure you do not damage the lighting. Do not
clean or touch the LED ‚ in the appliance door.
12. Dry the door panels and refit them.
2
1
E
D
F
G
E
D
Loading ...
Loading ...
Loading ...