Loading ...
Loading ...
Loading ...
28
5 Maintenance
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Press the
‘Next’ button.
‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are cleaned.
T During the first brief interruption, set the setting wheel of
the professional fine foam frother to the Milk position è.
‘Clean the milk system’
T Rinse the container thoroughly and fill the front part with
250ml of fresh water.
T Place this under the fine foam frother and reconnect the
milk pipe to the container.
T Press the
‘Next’ button.
‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are rinsed with fresh water.
The start screen is displayed.
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk. Your JURA will not prompt you to dis-
mantle and rinse the professional fine foam frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
T Dismantle the professional fine foam frother into its individ-
ual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the professional
fine foam frother.
T Firmly attach the professional fine foam frother to the
Connector System
©
.
é
è
6
é
è
Dismantling and rinsing
the professional fine
foam frother
é
è
Loading ...
Loading ...
Loading ...