Loading ...
Loading ...
Loading ...
26
5 Maintenance
5 Maintenance
Your JURA has the following integrated maintenance programmes:
U
Rinsing the machine (‘Rinse the coffee system’)
U
Rinsing the fine foam frother (‘Rinse the milk system’)
U
Cleaning the fine foam frother (‘Clean the milk system’)
U
Changing the filter (‘Change the filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
E Carry out each maintenance programme when you are
prompted to do so.
E Press the
‘Pc’ button to view a list of the maintenance pro-
grammes. When the bar is completely filled with red, your
JURA will prompt you to perform the appropriate mainte-
nance programme.
You can start coffee system rinsing manually at any time.
T Place a receptacle under the coffee spout.
T Press the
‘Pc’ button.
T Press the
‘>’ button.
T Press the
‘Rinse the coffee system’ button to start the rinse
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
After each milk preparation, the JURA prompts you to perform a milk
system rinse.
E In programming mode, you can set whether the milk system
rinsing is to be prompted 10 minutes after preparation or initi-
ated automatically (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Milk system rinsing’).
Rinsing the machine
é
è
Rinsing the fine foam
frother
Loading ...
Loading ...
Loading ...