Loading ...
Loading ...
Loading ...
17
Removing and Replacing the Ice Storage Bin:
1. Pull the covering panel up from the bottom.
2. Lift the plastic shutoff arm so it clicks into the Off (up) position.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser
will not work.
5. To restart ice production, lower the plastic shutoff arm to the
On (down) position. Make sure the door is closed tightly.
Style 5
Turning the Ice Maker On/Off:
The ON/OFF switch is located on the right side of the ice maker,
which can be accessed by lifting and opening the ice maker door.
� To turn on the ice maker, lift open the ice maker door, and flip
the switch ON/OFF to the ON (I) position.
� To manually turn the ice maker off, lift open the ice maker door,
and flip the switch ON/OFF to the OFF (O) position.
NOTE: The ice maker has an automatic shutoff to keep the
storage bin from overfilling during normal operation. As ice is
made, the ice cubes will fill the ice storage bin and the ice cubes
will raise the wire shutoff arm up. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but
the ice maker ON/OFF rocker switch will remain in the ON (I)
position. Do not force the wire shutoff arm up or down.
Removing and Replacing the Ice Storage Bin:
1. Pull the covering panel up from the bottom.
2. Move the ON/OFF rocker switch to the OFF (O) position.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser
will not work.
5. To restart ice production, move the ON/OFF rocker switch to
the ON (I) position Make sure the door is closed tightly.
Water Filtration System
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
Water Filter Status Light
The water filter status light will help you know when to change
your water filter. This is located on the refrigerator control panel.
To order a replacement water filter use part number W10295370A
(P4RFWB).
Style 1 – Order and Replace status:
� When the dispenser control panel’s water filter status display
changes to “Order,” this tells you that it is almost time to
change the water filter cartridge.
� Replace the water filter cartridge when the water filter status
display changes to “Replace.”
NOTE: If water flow to your water dispenser or ice maker
decreases noticeably, change the filter sooner. The filter
should be replaced at least every 6 months, depending on
your water quality and usage.
Style 2 – Red light status:
� When the light turns red on the control panel, this tells you that
it is time to change the water filter cartridge.
� It is recommended that you replace the filter when the status
light turns red or water flow to your water dispenser or ice
maker decreases noticeably.
NOTE: The filter should be replaced at least every 6
months, depending on your water quality and usage.
Resetting the Filter Status
After changing the water filter, reset the status light.
� For models with the Options button:
Press the Options button to enter Options mode, press Lock to
initiate the reset, and then press Measured Fill to confirm that
you want to reset the status light. When the system is reset,
the “Order” and “Replace” icons will disappear from the display
screen.
� For models with the Filter button:
Press and hold the Filter button for 3 seconds to reset the
status light. When the system is reset, the “Order” and
“Replace” icons will disappear from the display screen.
� For models with the Temp Setting button:
The reset button is located on the control panel in the
refrigerator compartment. To reset the status light after
changing the filter, press Temp Setting within 3 seconds. The
status light will change from red to off when the system is
reset.
� For models with the Light and Ice Type buttons:
Reset the filter status light by pressing and hold Light and Ice
Type buttons for 3 seconds. The status light will turn off when
the system is reset.
Loading ...
Loading ...
Loading ...