Loading ...
Loading ...
Loading ...
Description of Operation Panel Functions
1. Power Button
• To turn on the Washing Machine, please press this Button. To cut off the power, press the
Button again. After this Button is pressed, if no other Buttons are pressed within 10 minutes,
the power will be cut off automatically. After the Program stops running, the power will be cut
off automatically (within 10 minutes if the Draining Function is enabled).
2. Start/Pause Button
• When the power is turned on, the Washing Machine will start running after this Button is
pressed. This Button can also be used to temporarily stop the operation. You can just press
this Button again to resume the operation.
3. Program Selection Area
• Mix Wash, Cotton Wash, Wool Wash, Down Wash, Home Textiles, Quick Wash, Warm Wash,
Rinse+Spin, Spin Dry and Tub Clean.
• Press and hold the Quick Button for 3 seconds to control the tub light.
th
4. 6 Sense Smart Slider
• After the Machine is powered up, you do not need to press the Power Button but instead
th
press the central part of this Smart Slider for 3 seconds to automatically start the 6 Sense
One Key Smart Select Program.
th
• In the Idle state, you can press this Button to start the 6 Sense Smart Program and slide the
th
Slider to adjust the total time required of the 6 Sense Smart Program.
• For Programs other than the 6th Sense Smart Program, when setting the parameters of each
procedure, you can slide this Slider right and left to control the parameters of a certain
procedure.
5. Water Level Button
• This Button is used to select the water level appropriate for the laundry to be washed.
Washing and rinsing can be done at different water levels. Only Levels 6 to 10 can be chosen
for the Textiles Program. Only Levels 3 to 10 can be chosen for the Wool Program. Only
Levels 6 to 10 can be chosen for the Down Program.
6. Detergent Select Button
• Depending on the soil level of the laundry, you can use this Button to select the
amount of liquid detergent to be added or cancel the automatic addition of liquid detergent.
You can freely choose three levels of addition amount - LI, L2 and L3 (in an ascending order).
Description of Operation Panel Functions
7. Softener Select button
• You can use this button to choose the option of adding or excluding softener.
8. Preset Time Button
• You can use this Button to set the time from the start of the Program to the end of the
Program.
th
Note: This function is unavailable for the 6 Sense One Key Smart Select Program.
9. Special Function Buttons
Function Button
• You can use this between the Specialized Programs: Spray, Ex-Rinse, Hand (Wash)
and Retain (Water) Functions.
Variable Wave Button
• Use this Button to select the washing or rinsing strength according to the soil level of the
laundry. You can choose between four levels of water flow - HI, H2, H3 and H4 (in an
ascending order).
Super Soak Button
• You can use this Button to enable the Super soak Function and set the appropriate Soak time.
• This Button can also be used to set the Child Lock Function. See Page 19 for the method for
setting the Child Lock Function.
10. Procedure Buttons
• You can use this group of Buttons to freely set the Wash Time, Rinse Times, Spin Time and
Spin Speed.
• You can choose between four spin speeds - SI, S2, S3 and S4 (in an ascending order where
S1 indicates no spin-drying but draining and the spin-drying speed is 0)
11. Description of Display Functions
• Displays the remaining time during operation. For example
: Remaining Time: 20 minutes:
• Displays when will the Scheduled Program end during Preset Time Setting.
For example: Ends in 2 hours:
The Schedule Indicator will blink
•Displays the Fault Code when an abnormity occurs.
For example: Failed to add water:
•Displays whether some functions are enabled where the constantly lit Function Indicators
show the functions that are enabled.
Lid Lock Indicator; the constantly lit Indicator indicates that the lid is locked.
Detergent Indicator; the constantly lit Indicator indicates that the Automatic Detergent
Addition Function is enabled.
Softener Indicator; the constantly lit Indicator indicates that the Automatic Softener Addition
Function is enabled.
Child Lock Indicator; the constantly lit Indicator indicates that the Child Lock Function is enabled.
Dry
Loading ...
Loading ...
Loading ...