Loading ...
Loading ...
Loading ...
21
Remove power cord from clips and place over top of washer
to allow free access to back of washer.
NOTE: If washer is transported at later date, call your
local service center. To avoid suspension and structural
damage, a certied technician must properly set up
washer for relocation.
IMPORTANT: Do not plug washer in until installation has been
completed.
3. Remove power cord from clips
Route Drain Hose
Gently pull the corrugated drain hose from the shipping
clips.
5. Remove drain hose from washer
Proper routing of the drain hose protects your oor from damage
due to water leakage. Read and follow these instructions.
Close bolt holes on cabinet back with four transport bolt hole
plugs included with washer parts.
4. Cover bolt holes with transport
bolt hole plugs
For oor drain installations, you will need to connect the
drain hose form to the end of the drain hose. You may need
additional parts with separate directions. See “Alternate Parts.”
6. Connect laundry tub drain
or standpipe drain hose form
(oor drain installations only)
Loading ...
Loading ...
Loading ...