Loading ...
Loading ...
Loading ...
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and 12:00.
"12" flashes.
1. Press or to set the hours.
2. Press
.
3. Press or to set the minutes.
4. Press .
The display shows the new time.
To change the time of day press
again and again until starts to flash.
7.3 Setting the DURATION
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the minutes
for DURATION.
4. Press or the DURATION starts
automatically after 5 seconds.
5. Press
or to set the hours for
DURATION.
6. Press or the DURATION starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing and time setting. The oven
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
7.4 Setting the END
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the END and
press . First you set the minutes
and then the hours.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and the time setting . The
oven turns off automatically.
4. Press a sensor field to stop the
signal.
5. Turn off the oven.
7.5 Setting the TIME DELAY
function
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press
or to set the minutes
for DURATION.
4. Press .
5. Press or to set the hours for
DURATION.
6. Press .
The display shows flashing .
7. Press
or to set the END time
and press . First you set the
minutes and then the hours.
The oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time. When the set
time ends, the signal sounds for 2
minutes. The display shows flashing
and the time setting . The oven turns off
automatically.
8. Press a sensor field to stop the
signal.
9. Turn off the oven.
When the Time delay
function is turned on, the
display shows a symbol of
the heating function,
with a dot and . The dot
shows which clock function
is on in the Clock / residual
heat display.
7.6 Setting: Minute Minder
1. Press .
The display shows flashing and "00".
2. Press
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press or to set the MINUTE
MINDER and to confirm.
ENGLISH 13
Loading ...
Loading ...
Loading ...