Loading ...
Loading ...
Loading ...
2008/June/16 CD-DK890N_US
41
CD-DK890N
References
Cassette deck
Remote control
Tuner
iPod
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Symptom Possible cause
Cannot record. Is the erase-prevention tab
removed?
Cannot record tracks with
proper sound quality.
Is it a normal tape? (You cannot
record on a metal or CrO tape.)
Cannot erase completely.
Sound skipping. Is there any slack?
Cannot hear treble. Is the tape stretched?
Sound Fluctuation. Are the capstans, pinch rollers,
or heads dirty?
Cannot remove the tape. If a power failure occurs during
playback, the heads remain
engaged with the tape. Do not
open the compartment with great
force.
Symptom Possible cause
The remote control does
not operate.
Is the AC power cord of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle
incorrect?
Does the remote control sensor
receive strong light?
Symptom Possible cause
The radio makes unusual
noises continuously.
Is the unit placed near the TV or
computer?
Is the FM antenna or AM loop
antenna placed properly? Move
the antenna away from the AC
power cord if it is located nearby.
Symptom Possible cause
No sound is produced.
No image appears on the
TV/monitor.
The iPod is not playing.
The iPod is not properly
connected to the unit.
Is the AC power cord of the unit
plugged in?
The video cable is not properly
connected.
The TV/monitor’s input selection
is not properly set.
Does the display shows “DOCK
OK”?
iPod will not charge.
Wrong iPod adaptor is used.
The iPod is not making full
contact with the iPod connector.
The main unit is in stand-by
mode.
Using 3rd Generation iPod.
Loading ...
Loading ...
Loading ...