Loading ...
Loading ...
Loading ...
2008/June/16 CD-DK890N_US
11
CD-DK890N
Preparation for Use
Antenna connection
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
Speaker connection
Connect the black wire to the FRONT SPEAKERS minus (–)
terminal, and the red wire to the FRONT SPEAKERS plus (+)
terminal.
Caution:
Connecting
iPod
to a TV
The iPod with photo and video can be viewed by connecting to a TV/
monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
jack on the rear of the unit.
Note:
Please make sure to set iPod unit to either NTSC or PAL to match
your TV signal. Please visit Apple’s home page for further
information.
Supplied FM antenna:
Connect the FM antenna wire to the
FM 75 OHMS jack and position the FM
antenna wire in the direction where the
strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the
AM and GND terminals. Position the
AM loop antenna for optimum
reception. Place the AM loop antenna
on
a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
FM
antenna
AM loop
antenna
A
C INPUT
C INPU T
Red
Black
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not stand or sit on the speakers. You may
be injured.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Incorrect
A
C INPUT
C INPU T
TV
Video cable
(not supplied)
To video
input jack
Loading ...
Loading ...
Loading ...