Loading ...
Loading ...
Loading ...
9
Lowes.com/harborbreeze
FLUSHMOUNT INSTRUCTIONS
1. Remove canopy cover (D) by pressing out on the inner
edges of the canopy cover until it releases from the
canopy (C).
2. Remove the three cross-head screws preassembled near
coupling (P) on the motor housing (F). Guide motor wires
through the base of the canopy (C), then attach canopy
(C) to motor housing (F) with previously removed screws.
Tighten securely.
3. Raise assembly and temporarily place one side of
canopy (C) onto hook of mounting bracket (A). This will
allow for hands-free wiring.
A
C
Hook
3
2
Screw
C
F
P
1
C
D
Proceed to WIRING below.
Note: Flushmount installation will not use canopy cover (D),
downrod assembly (B), clevis pin (R), hairpin clip (S) or
coupling screws (T).
Loading ...
Loading ...
Loading ...