Loading ...
Loading ...
Loading ...
7
Lowes.com/harborbreeze
INITIAL INSTRUCTIONS
3. Check existing outlet box (not included) to ensure it is
securely fastened to at least two points in a structural
ceiling member and can support the full weight of the
fan. Once verified, install mounting bracket (A) to the
outlet box using the screws and washers provided with
the outlet box.
4. Remove the hairpin clip (S) and clevis pin (R) from the
coupling (P) preassembled on motor housing (F). Retain
for later use.
Note: Make sure to keep loose hardware separate to
avoid confusion during installation.
Loosen the two coupling screws (T) preassembled in
coupling (P), but do not remove them.
Note: If using the angle mount, make sure open end of
mounting bracket (A) is installed facing the higher point
of the ceiling.
STANDARD/ANGLE-MOUNTING INSTRUCTIONS
1. Place downrod assembly (B) through canopy (C), canopy
cover (D) and coupling cover (E).
D
E
C
B
1
DANGER: A loose outlet box can cause the fan to
wobble and increase the fan's potential to fall, which
could result in serious injury or death.
3
Open End
A
A
4
R
S
T
P
F
For STANDARD/ANGLE-MOUNTING INSTRUCTIONS,
proceed to Step 1 below. For FLUSHMOUNT
INSTRUCTIONS, skip to page 9.
Loading ...
Loading ...
Loading ...