Loading ...
Loading ...
Loading ...
20
3-wire receptacle
(NEMA-type 10-30R)
3 prong plug
Spade terminals with
upturned ends
Ring terminals
3. Connect remaining wires
Connect remaining wires under outer terminal block screws.
Tighten screws, tighten strain relief screws. Finally, replace the
terminal block cover and secure with the 4 hold-down screws.
Now, go to “Level Dryer.”
3-Wire Power Supply Cord Connection
Use where local codes permit connecting cabinet-ground
conductor to neutral wire.
2. Connect remaining wires
Connect remaining wires under outer terminal block screws.
Tighten screws, tighten strain relief screws. Finally, replace the
terminal block cover and secure with the 4 hold-down screws.
Now, go to “Level Dryer.”
Connect neutral (center) wire (C) of power supply cord
under
center terminal block screw (B)
. Tighten screw.
3-Wire Power Supply Cord Strain Relief:
IMPORTANT: Use the strain relief supplied with the dryer.
Attach power supply cord to strain relief
Put power supply cord through the strain relief. Be sure that
the wire insulation on the power supply cord is inside the
strain relief. Do not further tighten strain relief screws at
this point.
1. Connect neutral (center) wire
D
C
B
Loading ...
Loading ...
Loading ...