Loading ...
Loading ...
Loading ...
ITEM REMARKS REF.
Engine stop switch Ensure proper
operation
page 31
Air filter, pre-filter Inspect, clean page 124
Headlights Check operation page 127
Brake light/tail lamp Check operation page 127
Riding gear Wear approved helmet,
goggles, and protective
clothing
page 12
Mirrors (if equipped) Adjust for best side/rear
vision
–
Winch (if equipped) Inspect cable and
switch.
page 87
STARTING THE ENGINE
1. Position the vehicle on a level surface outdoors or in a well- ventilated area.
2. Place the transmission in PARK.
3. Lock the parking brake.
TIP
The starter interlock will prevent the engine from starting if the transmission is
in gear and the brake is not engaged.
4. Sit on the vehicle and move the engine stop switch to RUN.
TIP
Do not press the throttle while starting the engine.
5. Turn the ignition key past the ON position to engage the starter. Activate the
starter for a maximum of five seconds, releasing the key when the engine
starts.
6. If the engine does not start, return the key to the OFF position and wait five
seconds before attempting to start again. Activate the starter for another five
seconds if necessary. Repeat this procedure until the engine starts.
68
OPERATION
Loading ...
Loading ...
Loading ...