Loading ...
Loading ...
Loading ...
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM RECOMMENDED
LUBRICANT
CAPACITY AT
FLUID
CHANGE
INSPECTION PROCEDURE
Engine Oil PS-4 5W-50
4-Cycle Oil
1.9 l
(2 qt.)
Maintain level in safe range on
dipstick. See page 106.
Brake Fluid DOT 4 Brake Fluid — Maintain level between fill
lines. See page 115.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
1000 ml
(34 oz.)
Maintain level at bottom of fill
hole threads. See page 109.
Demand Drive Fluid
(Front Gearcase)
Demand Drive Fluid 275-300 ml
(9-10 oz.)
Maintain level at bottom of fill
hole threads. See page 110.
Rear Gearcase Oil ATV Angle Drive Fluid
(or GL5 80-90 weight
gear lube)
150 ml
(5 oz.)
See page 112
Front Prop Shaft
Yoke
U-Joint Grease — Grease fittings (3 pumps
maximum) every 800 km (500
miles), before long periods of
storage, or after pressure
washing or submerging.
q
Front Prop Shaft Yoke
105
MAINTENANCE
Loading ...
Loading ...
Loading ...