Loading ...
Loading ...
Loading ...
WHEEL REMOVAL / INSTALLATION
1. Position the vehicle on a level surface.
2. Place the transmission in PARK.
3. Loosen the wheel nuts slightly.
4. Elevate the end of the vehicle. See the Elevating the Vehicle for Service
section for details.
5. Remove the wheel nuts.
6. Remove the wheel.
7. Place the wheel on the hub.
8. install the wheel nuts finger tight.
9. Lower the vehicle to the ground.
10. Torque the wheel nuts to specification. See the Wheel Nut Torque
Specifications section for torque values.
AIR FILTER
1. Remove the seat.
2. Release the air box cover clips and remove the air box cover.
3. Loosen the clamp and remove the filter.
4. Remove the fabric type pre-filter from the main filter. Wash the pre-filter in
soapy water, then rinse and let dry.
5. Reinstall the pre-filter over the main filter. Install a new main filter if needed.
6. Reinstall the filter into the air box and tighten the clamp. Do not overtighten
the clamp, as filter damage could occur.
7. Reinstall the air box cover and the seat.
124
MAINTENANCE
Loading ...
Loading ...
Loading ...