Loading ...
Loading ...
Loading ...
HITCH REMOVAL / INSTALLATION
1. To remove the hitch (if equipped), remove the cotter pin
q
and hitch pin
w
.
Remove the hitch, then reinstall the hitch pin
w
and secure the cotter pin
q
.
2. To install the hitch, remove the cotter pin
q
from the hitch pin and remove
the hitch pin
w
.
3. Install the hitch to the receiver.
4. Reinstall the hitch pin (from the left side of the hitch) through the bore of both
the receiver and the hitch.
5. Reinstall the cotter pin. Make sure the hitch assembly is secure at that the
cotter pin is properly engaged over the hitch pin.
7-WAY TRAILER CONNECTOR
The 7-way trailer connector installed on
your vehicle meets the requirements of
European standard ISO 1724. This
connector uses all 7 pins on newer
model trailers. An older model trailer
may not be compatible with this
connector. Improper electrical wiring
changes can result in damage to both
vehicle and trailer components. When in
doubt about your trailer connection,
please contact a qualified towbar
specialist for assistance.
41
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...