Loading ...
Loading ...
Loading ...
275
[MC47150(ALL)01/96]
2. Snap the retaining wire over both sides of
the bulb and connect the electrical connector.
[MC47275(ALL)01/96]
3. Position the headlamp on the vehicle and
install the four attaching screws.
*
[MC47300(ALL)01/96]
4. Turn the headlamps on and make sure that
they work properly. If the headlamp was
correctly aligned before you changed the
bulb, you should not need to align it again.
[MC47310(ALL)01/96]
Removing the High-Mount Brakelamp
Bulb
[MC47315(ALL)01/96]
Liftgate models
[MC47317(ALL)01/96]
To remove the brakelamp and bulb:
*
[MC47330(ALL)01/96]
1. Remove the two screws from the surface of
the lens.
*
[MC47340(ALL)01/96]
2. After removing the screws, remove the lamp
assembly.
[MC47353(ALL)01/96]
3. Disconnect the high-mount brakelamp wiring
connector.
[MC47356(ALL)01/96]
4. Remove the screw retaining the bulb holder
assembly, pull the bulb holder assembly
away from the lamp, and pull the bulb
straight out of the holder.
[MC47360(ALL)04/96]
To replace/install the brakelamp:
[MC47367(ALL)01/96]
1. Push bulb(s) into bulb holder assembly.
[MC47373(ALL)01/96]
2. Place bulb holder assembly on lamp and
install retaining screw. Tighten screw.
[MC47376(ALL)01/96]
3. Connect the high-mount brakelamp wiring
connector.
[MC47377(ALL)01/96]
4. Position the lamp assembly on the vehicle.
[MC47378(ALL)01/96]
5. Install and tighten the two screws.
File:11cpmca.ex
Update:Fri Jun 7 14:30:56 1996
Loading ...
Loading ...
Loading ...