Loading ...
Loading ...
Loading ...
112
*
[SS04220(ALL)02/96]
Dual locking mode retractors operate in two
ways:
*
[SS04230(ALL)02/96]
Vehicle sensitive (emergency) locking mode
*
[SS04240(ALL)02/96]
In this operating mode, the shoulder belt
retractor will allow the occupant freedom of
movement, locking tight only on hard braking,
hard cornering or impacts of approximately
5 mph (8 km/h) or more. The retractor can also
be made to lock by pulling the belt out quickly.
%
*
[SS04250(ALL)02/96]
Automatic locking mode
*
[SS04260(ALL)01/96]
In this operating mode, the shoulder belt
retractor will be automatically locked and will
remain locked when the combination
lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This
mode provides the following:
*
[SS04270(ALL)01/96]
❑
A tight lap/shoulder belt on the occupant.
*
[SS04280(ALL)01/96]
❑
Child safety seat installation.
*
[SS04300(ALL)01/96]
This mode must be used when installing a child
safety seat on the front passenger seat and rear
outboard seats where dual locking retractors are
provided.
*
[SS04310(ALL)01/96]
To switch the retractor from the emergency
locking mode to the automatic locking mode,
perform the following steps:
*
[SS04320(ALL)02/96]
1. Buckle the lap/shoulder combination belt.
*
[SS04330(ALL)01/96]
2. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and, when allowed to retract, a
clicking sound is heard. At this time, the belt
retractor is in the automatic locking mode
(child restraint mode).
File:06cpssa.ex
Update:Thu Jun 13 08:56:07 1996
Loading ...
Loading ...
Loading ...