Loading ...
Loading ...
Loading ...
119
[SS09975(ALL)04/96]
3. Pull the belt out of its holder as far as it will
go and untwist the belt or remove the object
that is jamming the belt. Let the belt retract.
*
[SS09985(ALL)01/96]
4. Then, pull the belt out and let it retract
several times to make sure that the belt
works properly.
[SS10000(ALL)01/96]
For Twisted Rear Outboard Combination
Lap and Shoulder Safety Belts —
Detachable Anchor
[SS10020(ALL)01/96]
Disengage the detachable anchor tongue from
the detachable anchor, remove the twist and
re-install the detachable anchor tongue end into
the detachable anchor until you hear a snap and
feel the latch engage.
[SS10040(ALL)04/96]
Procedure to Correct a Twisted Safety Belt
at the “D” Ring (if so equipped) Front
and/or Rear Outboard Seating Positions
[SS10060(ALL)04/96]
NOTE: The restraint system shown in the
following figures may be different than
the restraint system in your vehicle.
However, use these figures and this
procedure to correct a twisted safety
belt at any outboard seating position
that has a “D” ring.
File:06cpssa.ex
Update:Thu Jun 13 08:56:07 1996
Loading ...
Loading ...
Loading ...