Loading ...
Loading ...
Loading ...
- 18 -
appliance). The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment.
Connecting a flexible jointless stainless steel pipe to a threaded attachment
The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment. Only use pipe and seals that
comply with the current National Norms. These pipes must be installed so that their length is never any longer
than 2000mm when fully extended. Once the connection has been made, ensure that the flexible metal pipe does
not touch any moving parts and is not crushed.
Checking that the connection is tight
When installation is complete, check the pipe fittings for leaks using a soapy solution. Never use a flame.
Adapting to different types of gas
Warning: The step must be operated only by a qualified person.
In order to adapt the oven to a different type of gas with respect to the gas for which it was manufactured
(indicated on the label), follow these simple steps:
a) Replacing the oven burner nozzle
Open the oven door fully
Pull out the sliding oven bottom
Unscrew the burner fastening screws
Remove screw “V” and then the oven burner;
Unscrew the oven burner nozzle using the special socket spanner for the nozzles, or a 7mm socket spanner, and
replace it with a nozzle suited to the new type of gas (see Table 1)
Take particular care handing the spark plug wires and the thermocouple pipes
Replace all the parts, following the steps described above in the reverse order
Table 1
Regulating the primary air for the oven burner
b) The burner was designed to need any adjustments to the primary air.（The step must be operated only by a
qualified person.）
Loading ...
Loading ...
Loading ...