Loading ...
Loading ...
Loading ...
Run power cable to installation location. Place the hood
at its location. Using a pen, mark the position of the
screws (smaller part of the key holes). Remove the hood
and install the (8) 1/2" double thread screws leaving
a 1/8" gap (4 screws for 30" hood). Remove wiring
cover and set aside. Place the wire clamp, insert the
hood and tighten the wire clamp to secure the cable.
Place the hood under the cabinet and slide it in position.
Make sure the adapter enters the ductwork. Secure the
hood by tightening the screws completely.
_ WARNING: Risk of electrical shock. Electrlcal wiring must be done by qualified personnel in accordancewith all appllcable codes and standards. Before connecting wires, switch power off at service panel
and lock service disconnecting means to prevent power from being switched on accidentally.
1. Connect cable to wiring box using wire connectors.
Connect BLACK to BLACK, WHITE to WHITE, and
GREEN wire under second ground screw. Reinstall
wiring cover. DO NOT FORGET TO CONNECT THE
GROUND.
_E0008
1) Ground screw
l
i
i
i <
Loading ...
Loading ...
Loading ...