Loading ...
Loading ...
Loading ...
A Backspiash is available (see page 5 for more details). This backspiash must be installed before the hood shell
because the hood shell covers the backspiash top mounting screws. Also, when the range control panel is higher than
the cooktop, make sure there is at least 18" (457 mm) clearance between the bottom of hood and the range control
panel. (Refer to instructions included with backspiash.)
1. Remove the knockout for the choosen opening
(horizontal or vertical) at the back or top of the hood
and for the electric connection. YOU MUST install the
Row Deviator if you choose the vertical exhaust. See
pictures beside.
_DO002
4D0003
2. Using two 1/2" screws, secure the adapter/damper to
the top or back of the hood.
NOTE: For vertical exhaust, make sure that the damper
pivot is located towards the front of the hood.
_DO005
3. Tape the adapter/damper to the hood using metal foil
duct tape to seal it.
4D0006
Loading ...
Loading ...
Loading ...