Loading ...
Loading ...
Loading ...
407
3 Custom Function Setting ItemsN
C.Fn IV: Operation/Others
C.Fn-11 Warnings z in viewfinder
When any of the following functions are set, the <i> icon can be
displayed on the viewfinder’s bottom left (p.34). The <i> icon will also
appear on the Quick Control screen (p.58).
Select the function for which you want the warning icon to appear,
press <0> to add a checkmark [X], then select [OK].
When monochrome V is set:
If the Picture Style is set to [Monochrome] (p.162), the warning
icon will appear.
When WB is corrected:
If white balance correction is set (p.173), the warning icon will
appear.
When M is set:
If [z4: High ISO speed NR] is set to [Multi Shot Noise
Reduction] (p.176), the warning icon will appear.
C.Fn-12 LCD display when power ON
0: Display on
When you turn on the power, the Quick Control screen will appear
(p.58).
1: Previous display status
When you turn on the power, the camera will start with the LCD
monitor display in the state it was in when the power was last
turned off. Therefore, if you turn off the camera when the LCD
monitor is off, nothing will be displayed when you turn on the
camera again. This helps to save battery power. The menu
operations and image playback will be available as usual.
When [s: Shooting screen] is set to [Guided], this Custom Function
does not function. (Settings are disabled.)
Loading ...
Loading ...
Loading ...