Loading ...
Loading ...
Loading ...
405
3 Custom Function Setting ItemsN
C.Fn-7 Auto AF point selection: Color Tracking
Use this function to autofocus by recognizing colors equivalent to skin tones. This
function works when the AF area selection mode is set to Zone AF (manual selection
of zone), Large Zone AF (manual selection of zone), or Automatic selection AF.
0: Enable
The camera selects AF points automatically based on AF
information and information on colors equivalent to skin tones.
In One-Shot AF mode, focusing on a still human subject in the AF
area is made easier.
In AI Servo AF mode, focusing on a human subject in the AF area is made
easier. If no skin tones can be detected, the nearest subject will be focused
on. Once focus is achieved, AF points are automatically selected so that
the camera continues to focus on the color of the area it focused on first.
1: Disable
AF points are automatically selected based only on AF information.
C.Fn-8 AF point display during focus
You can set whether or not to display the AF point(s) in the following cases: 1.
when selecting the AF point(s), 2. when the camera is ready to shoot (before
AF operation), 3. during AF operation, and 4. when focus is achieved.
0: Selected (constant)
The selected AF point(s) is always displayed.
1: All (constant)
All the AF points are always displayed.
2: Selected (pre-AF,focused)
The selected AF point(s) is displayed for 1, 2, and 4.
3: Selected AF pt (focused)
The selected AF point(s) is displayed for 1 and 4.
4: Disable display
For 2, 3, and 4, the selected AF point(s) will not be displayed.
With setting [0:Enable], focusing will take slightly longer than with setting
[1:Disable].
Even with setting [0:Enable], the expected result may not be obtained
depending on the shooting conditions and subject.
Under light so low that the flash emits the AF-assist beam automatically,
AF points are selected automatically based only on AF information. (The
AF will not use information on colors equivalent to skin tones.)
With setting 2 or 3, the AF point will not be displayed even when focus is
achieved with AI Servo AF.
Loading ...
Loading ...
Loading ...