Loading ...
Loading ...
Loading ...
Vehicle Security Alarm
System — If Equipped
If the security alarm system detects an
inappropriate entry into the vehicle, or
the intrusion sensor detects movement
in the vehicle, which could result in the
vehicle or its contents being stolen, the
alarm alerts the surrounding area by
sounding the siren/horn and flashing
the hazard warning lights.
The system will not function unless it is
properly armed. Follow the arming
procedure correctly.
Siren/Horn Triggering Conditions
The siren/horn sounds intermittently,
and the hazard warning lights flash for
about 30 seconds when the system is
triggered by any one of the following:
Unlocking a door with an inside
door-lock knob.
Forcing open a door, the engine
compartment, or the trunk lid.
Opening the hood by operating the
hood release handle.
Placing the ignition in the ON position
without starting the engine.
With the intrusion sensor: the
intrusion sensor detects a movement in
the vehicle.
The system will be triggered again (up
to ten times) if one of the above
conditions remains.
The trunk lid will not open when the
vehicle security alarm system is
activated.
If the battery becomes drained while
the vehicle security alarm system is
armed, the siren will activate, and the
hazard warning lights will flash during
the battery charging or replacement
process.
How To Arm The System
Close the windows and the
convertible top.
Place the ignition in the OFF position.
Make sure the engine compartment,
convertible top, doors, and trunk lid are
closed.
Push the lock button on the key fob
or lock the driver's door from the
outside with the emergency key. The
hazard warning lights will flash once.
With The Advanced Keyless Entry
function: push a request switch. The
warning light in the instrument
panel flashes twice per second for
20 seconds. After 20 seconds the
system is fully armed.
The vehicle security alarm system can
also be armed by activating the auto
re-lock function with all the doors, the
trunk lid and the engine compartment
closed.
The system will disarm if one of the
following operations takes place within
20 seconds after pushing the lock
button: To rearm the system, perform
the arming procedure again:
1. Unlocking any door.
2. Opening any door.
3. Opening the engine compartment.
4. Placing the ignition in the ON
position.
When the doors are locked by pushing
the lock button on the key fob, or using
the emergency key, the hazard warning
lights will flash once to indicate that the
vehicle security alarm system is armed.
Note:
If any door or trunk lid remains
closed for 30 seconds, the doors, and
trunk lid automatically re-lock, and the
vehicle security alarm system arms
even if a window opens or the
convertible top is left down.
To reactivate the intrusion sensor,
turn off the armed vehicle security
alarm system and then rearm it.
The intrusion sensor is operational
when the vehicle security alarm system
is armed. To cancel the intrusion
sensor, push the intrusion sensor
cancel button each time the vehicle
security alarm system is armed.
25
Loading ...
Loading ...
Loading ...