Loading ...
Loading ...
Loading ...
2. Insert a coin, a flat blade screw
driver, or the tip of your emergency key
into the now exposed slot and carefully
pry in the direction of the arrows to
open the cover (3) slightly.
3.
Insert a coin, a flat blade screw driver,
or the tip of your emergency key into the
side gap and carefully pry in the direction
of the arrow to open the cover (4).
4. Separate the key fob case, then
remove the battery.
3 — Key Fob Case
5 — Key Fob Battery
5. Insert a new battery with the positive
pole facing up. Then, cover the battery
with the battery cap.
6. Close the cover and reinsert the
Emergency Key.
Note: Be careful not to allow the
rubber ring shown in call-out (6) to be
scratched or damaged. If the rubber
ring comes out, reinstall it before
inserting a new battery.
Key Suspend Function
If a key fob is left in the vehicle, key fob
functions are temporarily suspended to
prevent unlawful use of the vehicle.
To restore the functions, push the
unlock button on the functions-
suspended key fob.
Engine Start Function
When Key Fob Battery Is
Discharged
If a key fob has discharged or
malfunctioned, start the engine by
holding the Key Fob over the keyless
ignition START/STOP button. Be careful
to not to allow the following. The signal
from the key fob will not be received
correctly, and the engine may not start:
Contact with metal parts of other key
fobs or metal objects.
Contact from key fobs from other
vehicle’s equipped with an immobilizer
system.
07031301-362-002
3 — Pry Case Left Side
07031301-363-002
4 — Pry Case Right Side
07031301-364-003
Remove Back Cover For Battery
Replacement
07031301-367-001
6 — Install New Battery
17
Loading ...
Loading ...
Loading ...