Loading ...
Loading ...
Loading ...
Example 2: To cook without preheating
To cook at 220°C for 20 minutes.
1. Open the door, place the food inside
the oven and close the door. Press the
button once.
CONVECTION/COMBI. x1
2.
ENTRY dial until
3. Press the
button
to con rm the
temperature.
4. Use the ENTRY
dial to input the
cooking time
(20 minutes).
5. Press the
button to start
cooking.
Notes :
1. The cooking time cannot be input until the preheating temperature arrives. When the oven arrives at the desired temperature, the door must
be opened to input the cooking time.
2. The convection heater will stop automatically; if there is no input of the cooking time within 5 minutes. An audible signal will sound ve
times to remind you and the LED will display the time of day, if the clock has been set. If the clock has not been set, the display will only
show “0:00”.
3. When the oven is preheating, the turntable should remain in the oven. During preheating and convection cooking, you will hear the
cooling fan cycling on and o . This is completely normal and does not a ect the cooking.
4. Food manufacturers instructions are only a guideline, so cooking times may need to be adjusted.
5.
After cooking is complete the cooling fan will continue working for a short time to lower the temperature of the electrical and mechanical parts.
6.
You may detect smoke or a burning smell when using convection for the first time. This is normal and is not a sign that the oven has
malfunctioned. To avoid this problem, when rst using the oven, heat the oven without food for 20 minutes on grill and then convection at 220ºC.
IMPORTANT: During operation, to allow smoke or smells to disperse open a window.
WARNING:
The door, outer cabinet, oven cavity and accessories will become very hot during operation. To prevent burns, always use
thick oven gloves.
the display shows 220.
CONFIRM/+30S/
START
CONFIRM/
+30S/START
CONVECTION/COMBI.
Turn the
The button allows you to operate the following functions:
a. Direct start
button. The cooking
process will start immediately and each time the button is pressed this will increase the cooking time by 30 seconds.
b. Extend the cooking time
You can extend the cooking time during manual, grill, convection, combi cooking and time defrost in multiples of 30 seconds
if
button is pressed while the oven is in operation. During weight defrost and auto menu function and
sequence cooking, the
cooking time cannot be increased by pressing
button.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
Press and hold the STOP/CANCEL key for 3 seconds until a long beep sounds. The display will illuminate the lock indicator:
b. To cancel the CHILD LOCK:
Press and hold the STOP/CANCEL key for 3 seconds until a long beep sounds. The lock indicator will disappear.
CONFIRM/+30S/START
CONFIRM/+30S/START
1. +30sec SMART FUNCTION (Direct start)
CONFIRM
+30S/START
CONFIRM/+30S/START
1.You can directly start cooking on P10 microwave power level for 30 seconds by pressing the
ENTRY dial until the cooking time displays, then press to start cooking with full power. 2. Turn the
CONFIRM/+30S/START
2. CHILD LOCK:
CONVECTION COOKING CONT.
4. Press the
button
once more to start preheating. When
the preheated temperature has been
reached an audible signal will sound
twice to remind you to put the food into
the oven. The current temperature will
ash on the display.
5. Open the door, place the food inside
the oven and close the door. Use the
ENTRY dial to input the cooking time (25
minutes).
6. Press the
button to
start cooking.
The display will count down through the
programmed cooking time. The convection
indicator will ash.
CONFIRM/+30S/START
CONFIRM/+30S/START
OTHER SMART CONVENIENT FUNCTIONS
12
3. SMART ECO MODE:
The SMART eco mode function automatically comes on after 5 minutes of the microwave not being in use. In SMART eco mode the microwave
to save energy. Once any button is pressed or the dial is turned the microwave will exit SMART eco mode and return to display will turn off
normal function.
Loading ...
Loading ...
Loading ...