Loading ...
Loading ...
Loading ...
OPERATION
OvenControl, C/oclrand Timer
4. Press the START pad to cancel
the 6 second beep and leave the
special feature mode,
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
Start,
Your new control has a series of tones
that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will also
alert you there may be a problem with
the functions Below are the types of
tones and a brief description of each
TONES WHILE SETTLING THE
CONTROL--When you press a touch
pad you wilt hear a beep_ This beep
will let you know you have placed
enough pressure on the pad to
activate it. (The arrow pads do not
beep)
END OF TIMED CYCLE TONE--At
the end of a timed cooking function,
you will hear 3 short beeps followed by
t beep every 6 seconds, This 6
second beep will continue to sound
until the CLEAR/OFF pad is pressed
or you may select the special feature
to cancel this 6 second beep from
sounding at the end of future cycles
TO CANCEL THE 6 SECOND
BEEP
lm Press and hold the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF"
2, Press the KITCHEN TIMER
ONIOFF pad. The display will
show "CON BEEP" (continous
beep)
3, Press the KITCHEN TIMER
OHfOFF pad again The display
will show "BEEP" (beep
canceled).
ATTENTION TONE--This tone will
sound if you make an error or an
oversight is made while setting an
oven function.
Examples would be.
a. Setting a clean cycle and the oven
door is not properly closed.
b. Setting a function and not pressing
Start_
c. Pressing an additional function pad
without first setting a temperature or
time
d. ERR witi flash if you set an invalid
temperature Press the
CLEAR/OFF pad to clear the
control and reset your oven function
Any of these can be quickly identified
by watching the display.
PREHEAT TONE--When you set an
oven temperature, the oven
automatically starts to heal When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "FI" there may be a
problem with the control or oven
Simply press the CLEAR/OFF pad
and wait about an hour, Try setting the
function again If the code repeats,
write down the flashing code and call
for service, Tell the technician what
code was flashing
9
Loading ...
Loading ...
Loading ...