Loading ...
Loading ...
Loading ...
Items that have been soiled with substances such as vegetable
or mineral oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers should be washed
separately with an extra amount of detergent before being dried
in the washer dryer.
Do not use the appliance if items have been soiled with
industrial chemicals.
Do not dry unwashed items in the wash dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, and rubber backed articles and clothes, or
pillows fitted with foam rubber pads should not be dried in the
washer dryer.
Fabric softeners, or similar products, should only be used as
specified by the product manufacturer’s instructions.
Remove all objects from items that could be a source of fire
ignition such as lighters or matches.
Never stop the washer dryer before the end of the drying cycle
unless all items are quickly removed and separated so that
residual heat can dissipate.
The final part of the washer dryer cycle takes place without heat
(cool down cycle) to ensure that items reach a temperature that
will not cause damage to them.
Do not use high pressure water sprays and/or steam to clean
the appliance.
Clean the appliance with a moist cloth. Use only neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Before any maintenance operation, deactivate the appliance
and disconnect the mains plug from the socket.
SAFETY INSTRUCTIONS
INSTALLATION
The installation must comply with
relevant national regulations.
Follow the installation instructions supplied with
the appliance.
Do not install or use the appliance where the
temperature can be less than 0°C or where it is
exposed to the weather.
Always keep the appliance vertical when it is
being moved.
Make sure that there is air circulation between
the appliance and the floor.
Remove all the packaging and the transit bolts.
4
Loading ...
Loading ...
Loading ...