Loading ...
Loading ...
Loading ...
x
y
y
Cupboard door preparation
For countersinking the door, it is recom-
mended to call a professional.
Align the cupboard door to the furniture correctly.
Measure the distance X to fix the height of the hole
to countersink the upper hinge. The centre of the
hole Y should be at the same height of the stroke on
the hinge support.
16-22 mm
22±1,5 mm
449
mm
595-598 mm
Ø 35 mm
12,5 - 14 mm
Set the position of the lower hole respecting dimen-
sions and distances shown in the drawing (449
mm).
Countersink the holes.
A
Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5 - 14 mm depending on the
depth of cupboard door) on the inner side of the
door.
The hinges will be fixed to the door by means of the
four supplied screws A.
max. 105°
To align the door perfectly, make sure
that the edge of cupboard door is par-
allel with the appliance edge and to re-
spect the proper opening angle (max.
105 °C).
14
Loading ...
Loading ...
Loading ...