Loading ...
Loading ...
Loading ...
14
SpeedBoost
®
function
The SpeedBoost
®
function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can be activated for a cooking zone at any
time, provided the other cooking zone in the same group
is not in use (see illustration).
Activation
1.
Select an element.
2.
Touch the Speed Boost key.
› lights up on the display.
The function is activated.
Deactivation
1.
Select the element on which SpeedBoost
®
is set.
2.
Touch the Speed Boost key.
› goes out on the display and the element switched
back to heat setting Š.
The function is deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
Panel lock
You can use the panel lock to prevent children from
accidentally turning the cooktop on.
Turning the panel lock on
The cooktop must be turned off.
Touch Panel Lock for 4 seconds. The D indicator over
Panel Lock lights up for 10seconds. The cooktop is now
locked.
Turning the panel lock off
Touch Panel Lock for 4 seconds. The child lock is now
deactivated.
9 CAUTION
The panel lock may be accidentally turned on and
off due to:
▯ water spilled during cleaning
▯ food that has overflowed
▯ objects being placed on the Panel Lock key.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Switching on and off: You can find out how to switch the
automatic panel lock on in the section ~ "Basic
settings"
Wipe Protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate: Touch the Clean Lock key. The Ú indicator
above the key lights up. The control panel is locked for
35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate: To deactivate the function before the time
has elapsed, touch the Panel Lock key. The Ú indicator
above the key turns off, the function is deactivated.
Notes
▯ An acoustic signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
▯ The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating. ”‰ and the residual heat
indicator •/œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1to 10hours).
Loading ...
Loading ...
Loading ...