Loading ...
Loading ...
Loading ...
9
More Modes
Temperature Calibration
IMPORTANT: Do not use a thermometer to measure the oven
temperature. Elements will cycle on and off as needed to maintain
a consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Opening the oven door will affect
cycling of the elements and impact the temperature.
The oven provides accurate temperatures and has been
thoroughly tested at the factory. However, it may cook faster
or slower than your previous oven, causing baking or browning
differences. If necessary, the temperature calibration can be
adjusted in either Fahrenheit or Celsius.
On double ovens, the upper oven and the lower oven can each be
calibrated independently.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Adjust the oven temp up to
+/-30° (+/-18°C). It is recommended to make changes in 5°F (3°C)
increments until desired results are achieved.
NOTE: The oven display will continue to show the original
set temperature and will not reflect the calibration offset. For
example, if set to 350° (177°C) and calibrated to -20, the display
will continue to show 350° (177°C).
To Adjust Oven Temperature Calibration:
1. Press the Tools keypad.
2. Select MORE MODES.
3. Select TEMPERATURE CALIBRATION.
4. Scroll from left to right to increase or decrease the
temperature.
NOTE: On double ovens, the upper oven and the lower oven can
be independently calibrated.
Sabbath Mode
For guidance on usage and a complete list of models with
Sabbath Mode, visit www.star-k.org.
The Sabbath Mode sets the oven to remain on in a bake setting
until disabled.
When the Sabbath Mode is activated, only the Bake cycle will
operate. All other cooking and cleaning cycles are disabled. No
tones will sound, and the displays will not indicate temperature
changes. When the oven door is opened or closed, the oven light
will not turn on or off, and the heating elements will not turn on or
off immediately.
For double ovens, the upper and lower oven temperatures and
cook timers can be set independently.
If a cook timer is set, the countdown will appear. The timer will
countdown once the timer is set.
NOTE: If a power failure happens while Sabbath Mode is running,
the oven will show Sabbath Mode is on, but the Bake cycle will not
be on. If the oven door is opened during this time, the oven light
will not turn on.
To enable and activate Sabbath Mode:
1. Press the Tools keypad.
2. Select MORE MODES.
3. Select SABBATH MODE.
4. Press SABBATH MODE again to enable Sabbath Mode
(Sabbath Mode is preset to Off).
5. Select YES if you would like to have both ovens or just one
oven on and baking during the Sabbath.
6. If only one oven is to be used, select that one. Once the cavity
is selected, the user will be prompted to input the temperature
and cook time.
If Sabbath Mode is to be used for both ovens, select each
oven cavity separately. Once the cavity is selected, the user
will be prompted to input the temperature and cook time for
each cavity independently.
(Optional) For timed cooking in Sabbath Mode, select ADD
A COOK TIME for the selected oven, enter the desired cook
time, and then select NEXT.
7. Select START.
To disable and exit Sabbath Mode:
1. Press the Oven Power/Cancel keypad.
2. Press and hold the display screen for 3 seconds.
To Adjust Temperature for single and double oven models:
1. Press the +/- 25 on the display screen to select the new
temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound.
Loading ...
Loading ...
Loading ...