Loading ...
Loading ...
Loading ...
If and when224
Interior light and front reading light
To remove glass
– Insert a fine screwdriver between the casing and the glass
⇒ fig. 167.
– Carefully remove the glass, levering it to avoid possible damage.
To replace the lamps
– Pull the lamps outwards.
– To remove the central lamp, hold and press to one side.
Assembly
– Proceed in the reverse order, pressing gently on the outer edge
of the side light.
– First fit the glass with the fastening tabs over the frame of the
switch. Next press the front part until the two long tabs click on
the support.
Additional brake lights*
Given the difficulty involved in the replacement of this light it should be done
by the Technical Service.
Glove box light*
– Insert screwdriver above, between the light and the glove box.
– Carefully remove the light Next lift the light out sideways.
– Replace the bulb.
– Insert the light on the connector side, first underneath then push
at the top until it clicks into place.
Fig. 167 Front reading
light
ibiza_angles_0706_DEF Seite 224 Freitag, 1. September 2006 1:18 13
Loading ...
Loading ...
Loading ...