Loading ...
Loading ...
Loading ...
If and when 223
Safety First Operating instructions Tips and Maintenance Technical Data
Rear lights on frame
Side light 2/ Brake light/ Indicator light
– Open the tailgate.
– Unscrew the screws ⇒ fig. 165 using a flat-blade screwdriver.
– Move the rear light outwards and pull.
– If necessary, unplug the connector.
– Unscrew the bolt ⇒ fig. 166.
– Take out the lamp holder.
– Press and rotate the lamps to the left.
– Remove faulty lamp and replace it.
– Proceed in the reverse order, pressing gently on the outer edge
of the rear light (in the area of the metal clips).
Note
Make sure that when assembling all seals and rubbers are correctly fitted.
Number plate light
– Release transparent lamp cover by levering the tab with the flat
part of a screwdriver.
– Remove the defective lamp from the lamp holder, holding it in
the centre, press to one side and fit new lamp.
– Fit lamp cover in its space, taking special care when replacing the
rubber seal and press until it clicks into place.
Fig. 165 Rear lights on
bodywork
Fig. 166 Rear lights on
bodywork
A
F
A
G
ibiza_angles_0706_DEF Seite 223 Freitag, 1. September 2006 1:18 13
Loading ...
Loading ...
Loading ...