Loading ...
Loading ...
Loading ...
Heating, Ventilation and Air conditioning118
• In air recirculation mode, no ambient air enters the vehicle interior. The
windows can quickly fog over if the heating is switched off. Therefore, you
should never leave the air recirculation mode switched on for longer
periods, as this increases the risk of an accident.
Note
• Please observe the general notes ⇒ page 126.
Vehicle ventilation or heating
Ventilating the passenger compartment
– Turn the temperature selector ⇒ fig. 91 anti-clockwise.
– Turn blower switch to speed settings 1-4.
– Set the airflow to the desired direction using air distribution
control .
– Open the relevant air outlets.
Heating the interior
– Turn the temperature selector ⇒ fig. 91 clockwise to select
the required temperature.
– Turn blower switch to speed settings 1-4.
– Set the airflow to the desired direction using air distribution
control .
– Open the relevant air outlets.
Defrosting the windscreen
– Turn the temperature selector ⇒ fig. 91 clockwise to the
maximum temperature.
– Turn the blower switch to setting 4.
– Set air distribution to
.
–Close outlet .
– Open and turn outlet towards side windows
Demisting the windscreen and the side windows
– Turn the temperature selector ⇒ fig. 91 to the heating zone.
– Turn blower switch to speed settings 2-3.
– Set air distribution to
.
WARNING (continued)
Fig. 91 On the dash
panel: Heater controls
A
1
A
7
A
C
A
A
A
7
A
C
A
A
A
B
A
3
A
4
A
A
A
7
ibiza_angles_0706_DEF Seite 118 Freitag, 1. September 2006 1:18 13
Loading ...
Loading ...
Loading ...