Loading ...
Loading ...
Loading ...
If and when222
– Remove the plastic cover ⇒ page 221, fig. 161 and the
plastic caps ⇒ page 221, fig. 161 carefully levering with the
flat part of a screwdriver and taking special care not to scratch
the paintwork.
– Extract the bolts ⇒ page 221, fig. 162 and disconnect the
connector.
– Remove the rear light from its housing.
Rear lights on the tailgate: Accessing the lamp
Side light 1/ Fog light/ reverse light
– Unscrew the bolts ⇒ fig. 164 and take the lamp holder out.
– Press and rotate the large lamp holder to the left. For the small
lamp, rotate and extract the lamp holder and pull on the lamp.
– Remove lamp and replace.
– Fit the lamp holder and fit.
– Fit the caps and the plastic cover ⇒ fig. 163.
Note
Ensure that all of the joints, sealing components and the plastic caps are
correctly fitted.
A
A
A
B
A
C
Fig. 163 Rear light on
tailgate
Fig. 164 Access to the
lamp
A
D
A
B
A
A
A
B
ibiza_angles_0706_DEF Seite 222 Freitag, 1. September 2006 1:18 13
Loading ...
Loading ...
Loading ...