Loading ...
Loading ...
Loading ...
9
Dual-Zone Wine and Beverage Center
www.insigniaproducts.com
Leveling your cooler
• It is very important for the cooler to be level in order to function
properly. If the cooler is not leveled during installation, the door may
not close or seal properly, causing cooling, frost, or moisture problems.
• To level your cooler, you may either turn the leveling foot clockwise to
raise that side to the cooler or turn it counter-clockwise to lower that
side.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having
a grounding wire with a grounding plug. The plug must be inserted into
an outlet that is properly installed and grounded.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood, or if doubt exists as to
whether the cooler is properly grounded.
Connecting to power
• Plug the appliance into a dedicated, properly installed grounded wall
outlet. This appliance should be operated on a separate electrical circuit
from other operating appliances. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a
certified electrician or an authorized service center.
• Plug in and run your cooler for three to four hours before making any
temperature adjustments and before adding wine. This allows your cooler
to reach a stable temperature.
• Do not use an extension cord with this cooler. If the power cord is too
short, have a qualified electrician install an outlet near the cooler. Use of
an extension cord can negatively affect the cooler’s performance.
WARNINGS:
• Improper use of the grounding plug can result in a risk of electric shock.
• Do not, under any circumstances, cut or remove the third ground prong from
the supplied power cord.
CAUTION: This unit is not designed to be installed in an RV or used with an
inverter.
Notes:
• Check your local power source. This cooler requires a 110 V-120 V, 60 Hz
power supply.
• Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this cooler.
Loading ...
Loading ...
Loading ...