Loading ...
Loading ...
Loading ...
10
NS-BC2ZSS8
www.insigniaproducts.com
Using your wine and beverage center
Turning on your cooler
Press the button to turn your cooler on. The display screen and
indicators blink for three seconds and an audible beep will be heard, then
the compressor starts working.
You can manually set your unit to “Standby” mode by touching the
button for approximately three seconds, provided that no other setting is
in effect (the display is not blinking). Repeating this action restarts the
unit.
Setting the temperature
Under normal conditions, the temperature always shows the set
temperature. When adjusting the temperature, the temperature display
blinks to indicate that the temperature is being adjusted.
The temperature in the left and right zones can be set independently by
using the control panel located in each zone. The temperature range of
both zones can be set between 37° F to 64° F (3° C to 18° C) ± 5° F (± 3° C).
When the or buttons are pressed, the temperature will increase or
decrease in increments of one degree. If the or buttons are pressed
and held for two seconds, the temperature will increase or decrease at a
speed of one degree per half second.
After you have adjusted the left and/or right zone to the temperature you
want, release the button. The temperature display will blink for
approximately three seconds to confirm the selected temperature. After
the display stops blinking, the temperature display will indicate the set
temperature of that zone.
Changing the temperature display
The temperature display can be exchanged between Celsius and
Fahrenheit by simultaneously pressing and holding the buttons for
approximately three seconds.
Understanding the dual temperature zones
There are two temperature zones in this appliance. They are divided by a
partition.
• Each zone has its own independent temperature control and display.
• Each zone can be used to store wine bottles or beverage cans.
• Each zone can hold up to 21 bottles or 57 cans.
Notes:
• A large number of bottles will lower the cooling efficiency of the cooler.
• Adjust the thermostat setting by one increment at a time. Allow several hours
for the temperature to stabilize between adjustments.
Loading ...
Loading ...
Loading ...