Loading ...
Loading ...
Loading ...
14
NS-BC2ZSS8
www.insigniaproducts.com
Moving your wine cooler
1 Turn off the cooler and unplug it from the wall outlet.
2 Remove all wine/beverages.
3 Securely tape down all loose items inside your cooler.
4 Tape the door shut.
Make sure that the cooler stays in the upright position during
transportation.
Tips on saving energy
• Locate your cooler in the coolest area of the room, away from heat
producing appliances or heating ducts and out of the direct sunlight.
• Overloading the cooler forces the compressor to run longer.
• Do not open the door too often, especially if the weather is very hot. Close
the door as soon as possible to prevent cool air from escaping.
• Make sure that the appliance is sufficiently ventilated, with adequate air
circulation behind it.
Troubleshooting
Error codes
If a fault is detected, the display shows one of the following codes:
If any of these error codes appears on the display, please contact your
local dealer or service center. Do not try to repair the cooler yourself.
CAUTION: Do not try to repair your cooler yourself. Doing so invalidates the
warranty.
Fault Code E1 E2 E3 E4
Description Temperature
sensor error in
the left zone
Temperature
sensor error in the
right zone
DC electric fan
error in the left
zone
DC electric fan
error in the right
zone
PROBLEM SOLUTION
The cooler does not operate. • Make sure that the cooler is plugged in and that the
plug is pushed completely into the outlet.
• Check the house fuse/circuit breaker box and replace
the fuse or reset the circuit breaker.
• If a power failure occurs, the cooler turns off. Wait until
the power is restored, then turn it on again.
Loading ...
Loading ...
Loading ...