Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
move your hand over the light unit
the underside of the light unit (MSGP3).
Note:
mode.
Cleaning and maintenance
Descaling
Tap water can cause deposits
to build up in the pump and on
plastic parts.
water (max. 55 °C).
Pour the descaling solution into the bowl
up to the maximum capacity.
Start the pump manually as follows.
13. MSGP6: Hold your hand on the light
up blue.
MSGP3: Press the button on the
until the light lights up green.
The pump will operate for approx.
2.5 minutes.
If necessary, leave the descaling
then restart the pump.
Cleaning
Clean all parts thoroughly after the harvest
or after descaling.
Remove the light unit and height
modules.
points to .
Remove the pump, plant tray and
watering insert.
Notes:
– The water bowl, plant tray and watering
base can be cleaned in the dishwasher
at a maximum of 55 °C.
– Wipe the light unit, height modules and
pump with a damp cloth only and dry
them.
Icon 4
AntiCalc
Assembling the watering unit
14. Place the plant tray onto the watering
tray
watering tray opening.
15. points
to
points to .
16. Place the assembled watering unit onto
the tray.
Troubleshooting
If problems with the light unit occur, it can
be restarted.
Disconnect the appliance from
the power supply (MSGP6 for at
Re-connect the appliance.
Reset sleep mode if necessary.
X
If a fault cannot be eliminated, please
contact customer service.
Disposal
J
Dispose of packaging in an environ-
mentally-friendly manner. This
appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste electrical
and electronic equipment – WEEE).
The guideline determines the frame-
work for the return and recycling
of used appliances as applicable
throughout the EU. Please ask your
specialist retailer about current
disposal facilities.
Loading ...
Loading ...
Loading ...